News Center
Aluminum Alloy Parts Manufacturing Base
05
2022-08
What are the characteristics of aluminum die casting?
Generally speaking, using the production method of aluminum die casting, we can use it to manufacture some high-quality auto parts, pipe fittings on automobile engines
2022-08-05
05
2022-08
What are the characteristics of low pressure casting
Low pressure casting means that the casting mold is generally placed above a sealed crucible, and compressed air is introduced into the crucible to cause a low pressure (0.06-0.15MPa) on the surface of the molten metal
2022-08-05
05
2022-08
3 characteristics of aluminum alloy heat treatment
The principle of aluminum die casting heat treatment is to control the heating rate at a; heating and accelerated cooling. Thereby, the corrosion resistance of the aluminum alloy is improved, the processing ability is improved
2022-08-05
05
2022-08
How to better set the parting surface of die-casting aluminum alloy?
Die-casting aluminum alloys must use die-casting molds. We all know that die casting molds are divided into movable molds and fixed molds.
2022-08-05
05
2022-08
9 Reasons for Oxidation Coloring of Die Cast Aluminum
The pores of the oxide film are small. The reason is that the oxidation temperature is too low, which inhibits the dissolution of the film by sulfuric acid. The oxidation temperature can be appropriately adjusted to avoid this problem.
2022-08-05
05
2022-08
Process for optimizing porosity defects in aluminum alloy die castings
With the need for lightweight, energy saving and emission reduction, aluminum alloys are increasingly used in transportation fields such as aerospace, automobiles and ships.
2022-08-05
05
2022-08
Preheating requirements of aluminum castings and rational use of aluminum casting molds
Aluminum castings require preheating before use. The aluminum mold must be preheated to a certain temperature before use. Preheating can extend the life of the mold.
2022-08-05
05
2022-08
Die casting molds help to obtain high quality die casting products
Die casting molds help to obtain high quality die casting products. In the die-casting production process, the die-casting mold is one of the important tools for the efficient production
2022-08-05
05
2022-08
Advantages and characteristics of aluminum alloy die castings
High production efficiency. Due to the fast filling speed and short filling time, the metal industry solidifies rapidly, and the cycle speed of die casting operation is fast.
2022-08-05
05
2022-08
Research Status and Development of Aluminum Alloy Die Casting Technology
With the development of society and the progress of the times, the die-casting industry, as a pillar of the new industry, has achieved amazing results.
2022-08-05
Hebei Oret Aluminum Alloy Co., Ltd.
Add：No. 593 Shitong Road, Tongye Town, Luquan District Shijiazhuang City, Hebei Province, China.
Sale Tel: +86-311-89170709/+86-311-89170708
Sale Fax: +86-311-89170898
Technology: +86-311-89170929
Quality: +86-311-89170799
E-mail: oret.guobj@csrzl.com
Copyright © 2022 Hebei Oret Aluminum Alloy Co., Ltd.